Menu
Your Cart
📢 Order Online In Minutes : Ordering toolings shouldn't take much time - Focus on manufacturing and leave the precision & global logistics to us.

Special Collets - Drawing Based Work Holding Collets

 The biggest manufacturer of World Class Collets.

Send us your enquiry with collet drawings, we will quote and supply your requirements as per your drawing, keeping runout and various other dimensions at precision.

Send your drawings to infotoolsengg@gmail.com  - We have dealt with 1000s of special varieties of collets over the years so we are very famaliar with your requirements for collets, feel free to contact us at anytime. We are always here to help.

 

Workholding collets (Outside diameter holding type)

 

Stationary type collets

 

Stationary type collets Stationary type collets are used for processing which wants to decide the axial direction of a workpiece correctly.
There is no dispersal in the axial direction because the collet itself does not move. Therefore, it is used by the secondary processing which wants to decide the axial direction correctly.
Stationary type collets can be used as tool holding collets with using the nose cap.

 

Stationary type collets, Spring Collets   Stationary type collets, Spring Collets
     
Stationary type collets, Spring Collets   Stationary type collets, Spring Collets
     
Stationary type collets, Spring Collets    

 

Draw back type collets

 

Draw back type collets Draw back type collets draw the collet itself and hold a workpiece using the screw of back portion. These collets are used for primary processing, such as NC lathe, in many cases.
Draw back type collets can be expected high precision compared with stationary type collets. Moreover, rigidity is high.
Positioning of the axial direction is not stabilized as compared with stationary type collets.

 

Draw back type collets   Draw back type collets
     
Draw back type collets   Draw back type collets

 

Push type collets Push type collets push the collet itself on the nose cap, and hold a workpiece. Therefore, the workpiece moves in the axial direction when it is held.
High precision is not expectable since it is hard to take out concentricity with taper of the nose cap. However, it is effective to avoid interference with cutting tools.

 

Push type collets   Push type collets
     
Push type collets   Push type collets
     
Push type collets    

 

Tan line collets

 

Tan line collets Tan line collets are mainly used for hobbing machine, such as Gleason (U.S. manufacture), and is indispensable to processing of differential gear of cars.
These collets have the structure of clamping each part by two tapers and are suitable for clamping long workpiece.

 

Tan line collets

 

Workholding collets (Inside diameter holding type)

 

Double taper expansion collets

 

Double taper expansion collets, Spring Collets Double taper expansion collets are standard form as expansion collets for inside diameter clamping type. It is made to be expanded by drawing the central part of the collet with a drawbar, and clamp a workpiece.
These collets open in parallel since there are flexing slots from both sides of front and back.
According to the form of these collets, a little more clamping range in a free state can be taken.

 

Double taper expansion collets, Spring Collets   Double taper expansion collets, Spring Collets
     
Double taper expansion collets, Spring Collets   Double taper expansion collets, Spring Collets
     
Double taper expansion collets, Spring Collets    

 

Single taper expansion collets

 

Single taper expansion collets Single taper expansion collets are used for primary processing, such as NC lathe, in many cases.

It is made to be expanded by drawing the central part of the collet with drawbar, and clamp a workpiece.

These collets open in parallel since there are flexing slots from both sides of front and back.

High precision is expectable as compared with double taper expansion collets.

 

Single taper expansion collets   Single taper expansion collets
     
Single taper expansion collets   Single taper expansion collets

 

Flange type expansion collets

 

Flange type expansion collets

These are expansion collets with flange. It is made to be expanded by drawing the central part of the collet with a drawbar, and clamp a workpiece.

These collets may not open in parallel in case of the specification that the bore of the collet is opened widely in a free state since one side of the collet is a flange.

It’s easy to insert a workpiece since more clamping range in a free state can be taken.

 

Flange type expansion collets   Flange type expansion collets
     
Flange type expansion collets   Flange type expansion collets

 

Expansion disk

 

Expansion disk

Expansion disk is used for the gear cutting machine along with the tan line collets, and is indispensable to processing of differential gear of cars.

Expansion disk has the structure faces two plates together face to face and makes an outside diameter extend by compressing, and clamp a workpiece.

   
   
   

 

Expansion disk

 

Carriage collet chucks

 

Feed fingers

 

Feed fingers, Spring Collets

Feed fingers are used as collets for supplying a workpiece of NC lathe and multi spindle lathe with auto bar feeder.

These are called “pusher” since these are collets which push in bar material.

 

Feed fingers, Spring Collets   Feed fingers, Spring Collets
     
Feed fingers, Spring Collets    

 

Finger collets

 

Feed fingers, Spring Collets

Feed collets hold a workpiece only by the spring force of the collet itself. Therefore, cautions are needed for clamping heavy workpiece.

The whole equipment will be cheap, since the opening-and-closing mechanism of collets are unnecessary.

 

Feed fingers, Spring Collets   Feed fingers, Spring Collets

 

Tool holding collets


 

Collets for tooling systems

 

Collets for tooling systems, Spring Collets

Collets for tooling systems are mainly used for holding cutting tools, and the form has single taper and double taper.

These collets can hold in parallel even if cutting tools have dimensional variation in outside diameter, since there are flexing slots from both sides of front and back.

It is not suitable for holding a workpiece since less clamping range in a free state can be taken as compared with draw back type collets.

 

Collets for tooling systems, Spring Collets   Collets for tooling systems, Spring Collets
     
Collets for tooling systems, Spring Collets   Collets for tooling systems, Spring Collets

 

Basic Technical Information On Collets

What are Spring Collets ?

Spring collets are perishable tools for fixing a workpiece at the processing, or fixing cutting tools, and used as some parts of a machine or a conveyance machine. It consists of a collet and devices, and a workpiece is that the collet included in the workholding devices open and close, and performs clamping and unclamping of a workopiece.

Outside diameter holding type   Inside diameter holding type


Spring collets are various by object works, such as size, the clamping method, and clamping force. There is a various shaped spring collets’ form as you can see the top page of a spring collets, and they are used for fix of a workpiece or cutting tools. In case of scroll chuck, a workpiece is clamped by three or four jaws. On the other hand, when we use spring collets, a workpiece is clamped as wrapping in with the number of flexing slot of the collet. Therefore, since the pressure concerning one point ends few, it can clamp powerfully, without pressure's distributing and damaging the whole clamping portion of the workpice.

 

Part names and functions of spring collets



Stationary
Stationary


Draw Back
Draw Back




The angle of a taper


The angle of a taper is denoted by double taper. Please inform us if double taper or single taper in order not to mix up.


The angle of a taper

 

Use Type Runout
accuracy
Axial
accuracy
Clamping
force

Workholding

Outside
diameter
holding

Stationary type collets  Stationary type
 collets
 ●●  ●●●  ●●
Drawback type collets  Drawback type
 collets
 ●●●  ●●  ●●●
Push type collets  Push type collets  ●●  ●●  ●●
Tan line collets  Tan line collets  ●●●  ●●  ●●

Inside
diameter
holding

Double taper expansion collets  Double taper
 expansion collets
 ●●  ●●  ●●
Single taper expansion collets  Single taper
 expansion collets
 ●●●  ●●  ●●
Flange type expansion collets  Flange type
 expansion collets
 ●●  ●●●  ●●
Expansion disk  Expansion disk  ●●  ●●  ●●●
Tool holding collets Collets for tooling systems  Collets for
 tooling systems
 ●●●  ●●  ●●●
Collets for air tools  Collets for air tools  ●  ●  ●●

Carriage collet chucks

Feed fingers  Feed fingers  ●  ●  ●
Finger collets  Finger collets  ●  ●  ●
* An upper table is a typical standard. (●●●Good,●●Middle,Low)
* Please ask about detail of specifications of spring collets or workholding devices using spring collets.
We Value Your Privacy
We use cookies to enhance your browsing experience, serve personalized content, show prices in your local currency, and analyse our traffic. By clicking "Accept All", you consent to our use of cookies.
Accept All