Other Converters

Data Transfer Rate Converter

Convert data transfer rates between bit/s, Mbps, MB/s and common interface standards. Note 8 bits = 1 byte, so 100 Mbps ≈ 12.5 MB/s.

DATA TRANSFER RATE CONVERTER — INSTANT RESULT

All supported units — data transfer rate

UnitSymbolTo bit/second (bit/s)From bit/second (bit/s)
Bit/secondbit/s1 bit/s = 1 bit/s1 bit/s = 1 bit/s
Kilobit/secondkbit/s1 kbit/s = 1,000 bit/s1 bit/s = 0.001 kbit/s
Megabit/secondMbit/s1 Mbit/s = 1,000,000 bit/s1 bit/s = 1e-06 Mbit/s
Gigabit/secondGbit/s1 Gbit/s = 1,000,000,000 bit/s1 bit/s = 1e-09 Gbit/s
Byte/secondB/s1 B/s = 8 bit/s1 bit/s = 0.125 B/s
Kilobyte/secondkB/s1 kB/s = 8,000 bit/s1 bit/s = 0.000125 kB/s
Megabyte/secondMB/s1 MB/s = 8,000,000 bit/s1 bit/s = 1.25e-07 MB/s
Gigabyte/secondGB/s1 GB/s = 8,000,000,000 bit/s1 bit/s = 1.25e-10 GB/s
T1 LineT11 T1 = 1,544,000 bit/s1 bit/s = 6.4766839e-07 T1
Ethernet (10BASE-T)10MbE1 10MbE = 10,000,000 bit/s1 bit/s = 1e-07 10MbE
Fast Ethernet100MbE1 100MbE = 100,000,000 bit/s1 bit/s = 1e-08 100MbE
Gigabit EthernetGbE1 GbE = 1,000,000,000 bit/s1 bit/s = 1e-09 GbE
USB 2.0 (high speed)USB21 USB2 = 480,000,000 bit/s1 bit/s = 2.08333e-09 USB2
USB 3.0 (SuperSpeed)USB31 USB3 = 5,000,000,000 bit/s1 bit/s = 2e-10 USB3
56k Modem56k1 56k = 56,000 bit/s1 bit/s = 1.7857143e-05 56k
OC-1OC-11 OC-1 = 51,840,000 bit/s1 bit/s = 1.9290123e-08 OC-1

Popular data transfer rate conversions

Frequently asked questions

What units does this data transfer rate converter support?
It supports 16 units: Bit/second (bit/s), Kilobit/second (kbit/s), Megabit/second (Mbit/s), Gigabit/second (Gbit/s), Byte/second (B/s), Kilobyte/second (kB/s), Megabyte/second (MB/s), Gigabyte/second (GB/s), T1 Line (T1), Ethernet (10BASE-T) (10MbE), Fast Ethernet (100MbE), Gigabit Ethernet (GbE), USB 2.0 (high speed) (USB2), USB 3.0 (SuperSpeed) (USB3), 56k Modem (56k), OC-1 (OC-1).
What is the base unit of data transfer rate?
The SI reference unit is the bit/second (bit/s). Every conversion is computed by converting the input to the base unit, then from the base unit to the target unit, so chained precision is preserved.
Is this converter accurate?
Yes. Conversion factors use exact legal definitions where they exist (for example 1 in = 25.4 mm exactly) and CODATA/ISO constants otherwise. Results are shown to up to 10 significant figures.