| Item Name | SHANK TAPER | L mm | L1 mm | L2 mm | ØD mm | ØD1 mm | Ød mm C.T. | Ød1 mm C.T. | Ød2 mm | M (THREAD) | A/F mm |
|---|---|---|---|---|---|---|---|---|---|---|---|
| CNC MT3 Dead Center With Draw-off Nut Extended Carbide Tipped Point (Tip DiametER11mm) | MT-3 | 81.0 | 57.0 | 67.0 | 24.1 | 23.825 | 11 | 11 | 14 | M27 X 1.5 | 21 |
| CNC MT4 Dead Center With Draw-off Nut Extended Carbide Tipped Point (Tip DiametER11mm) | MT-4 | 102.5 | 72.5 | 83.5 | 31.6 | 31.267 | 14 | 11 | 14 | M36 X 1.5 | 28 |
| CNC MT5 Dead Center With Draw-off Nut Extended Carbide Tipped Point (Tip Diameter 14mm) | MT-5 | 129.5 | 87.5 | 107.0 | 44.7 | 44.399 | 18 | 14 | 18 | M48 X 1.5 | 40 |
| CNC MT6 Dead Center With Draw-off Nut Extended Carbide Tipped Point (Tip Diameter 18mm) | MT-6 | 182.0 | 108.5 | 145.0 | 63.8 | 63.348 | 18 | 18 | 22 | M68 X 1.5 | 56 |
Brand: ToolsEngg : Plant 1
Weight: 1.20kg
Tungsten Carbide Tips brazed in front for high wear resistance.
Shunk made of Alloy Steel appropriately toughened.
Precision ground. Tip runout within 0.015 mm. w.r.t. Taper.
Broadly confirms to DIN:807
Standard point Angle 60°(Other Angles Like 75°/90° etc. against request)
Applica..
$33.30 USD
Brand: ToolsEngg : Plant 1
Weight: 1.20kg
Tungsten Carbide Tips brazed in front for high wear resistance.
Shunk made of Alloy Steel appropriately toughened.
Precision ground. Tip runout within 0.015 mm. w.r.t. Taper.
Broadly confirms to DIN:807
Standard point Angle 60°(Other Angles Like 75°/90° etc. against request)
Applica..
$42.60 USD
Brand: ToolsEngg : Plant 1
Weight: 5.00kg
Tungsten Carbide Tips brazed in front for high wear resistance.
Shunk made of Alloy Steel appropriately toughened.
Precision ground. Tip runout within 0.015 mm. w.r.t. Taper.
Broadly confirms to DIN:807
Standard point Angle 60°(Other Angles Like 75°/90° etc. against request)
Applica..
$75.90 USD
Brand: ToolsEngg : Plant 1
Weight: 6.50kg
Tungsten Carbide Tips brazed in front for high wear resistance.
Shunk made of Alloy Steel appropriately toughened.
Precision ground. Tip runout within 0.015 mm. w.r.t. Taper.
Broadly confirms to DIN:807
Standard point Angle 60°(Other Angles Like 75°/90° etc. against request)
Applica..
$149.61 USD
Showing 1 to 4 of 4 (1 Pages)