Menu
Your Cart

Dead Center With Draw-off Nut Stub Plain Male Point

Dead Center With Draw-off Nut Stub Plain Male Point
 Item Name SHANK TAPER L mm L1 mm L2 mm ØD mm ØD1 mm Ød mm M (THREAD) A/F mm S/F mm
 CNC MT2 Dead Center With Draw-off Nut Stub Plain Male Point MT-2 64.0 48.0 52.0 18.0 17.780 8 M22 X 1.5 14 15
 CNC MT3 Dead Center With Draw-off Nut Stub Plain Male Point MT-3 81.0 57.0 67.0 24.1 23.825 11 M27 X 1.5 19 21
 CNC MT4 Dead Center With Draw-off Nut Stub Plain Male Point MT-4 102.5 72.5 83.5 31.6 31.267 14 M36 X 1.5 27 28
 CNC MT5 Dead Center With Draw-off Nut Stub Plain Male Point MT-5 129.5 87.5 107.0 44.7 44.399 18 M48 X 1.5 36 40
 CNC MT6 Dead Center With Draw-off Nut Stub Plain Male Point MT-6 182.0 108.5 145.0 63.8 63.348 20 M68 X 1.5 55 56
Brand: ToolsEngg : Plant 1 Weight: 1.20kg
 Made from Bearing steel EN-31 and through hardened to 58 to 60 HRc. Broadly confirms to DIN:807 Precision ground. Tip runout within 0.015 mm. w.r.t. Taper. Application: On CNC Lathes with Live Tail Stock. Draw off Nut to be used to remove/extract the dead center from the Tails..
$12.82 USD
Brand: ToolsEngg : Plant 1 Weight: 1.20kg
 Made from Bearing steel EN-31 and through hardened to 58 to 60 HRc. Broadly confirms to DIN:807 Precision ground. Tip runout within 0.015 mm. w.r.t. Taper. Application: On CNC Lathes with Live Tail Stock. Draw off Nut to be used to remove/extract the dead center from the Tails..
$12.82 USD
Brand: ToolsEngg : Plant 1 Weight: 1.20kg
 Made from Bearing steel EN-31 and through hardened to 58 to 60 HRc. Broadly confirms to DIN:807 Precision ground. Tip runout within 0.015 mm. w.r.t. Taper. Application: On CNC Lathes with Live Tail Stock. Draw off Nut to be used to remove/extract the dead center from the Tails..
$15.20 USD
Brand: ToolsEngg : Plant 1 Weight: 1.20kg
 Made from Bearing steel EN-31 and through hardened to 58 to 60 HRc. Broadly confirms to DIN:807 Precision ground. Tip runout within 0.015 mm. w.r.t. Taper. Application: On CNC Lathes with Live Tail Stock. Draw off Nut to be used to remove/extract the dead center from the Tails..
$34.66 USD
Brand: ToolsEngg : Plant 1 Weight: 6.50kg
 Made from Bearing steel EN-31 and through hardened to 58 to 60 HRc. Broadly confirms to DIN:807 Precision ground. Tip runout within 0.015 mm. w.r.t. Taper. Application: On CNC Lathes with Live Tail Stock. Draw off Nut to be used to remove/extract the dead center from the Tails..
$87.84 USD