| Item Name | ØD (inch) | ØD1 (inch) | L | H1 | H2 | G |
|---|---|---|---|---|---|---|
| TMT40TS WN0.375" 1.97" Weldon Type Holder (Balanced to G2.5 25000 RPM) (Compatible with KM40TS™) (ISO26622-1) | 0.375 | 1.00 | 1.97 | 0.75 | - | 3/8"-24 |
| TMT40TS WN0.500'' 2.16'' Weldon Type Holder (Balanced to G2.5 25000 RPM) (Compatible with KM40TS™) (ISO26622-1) | 0.500 | 1.38 | 2.17 | 0.88 | - | 7/16''-20 |
| TMT40TS WN0.625'' 2.36'' Weldon Type Holder (Balanced to G2.5 25000 RPM) (Compatible with KM40TS™) (ISO26622-1) | 0.625 | 1.63 | 2.36 | 0.94 | - | 9/16''-18 |
| TMT40TS WN0.750'' 2.56'' Weldon Type Holder (Balanced to G2.5 25000 RPM) (Compatible with KM40TS™) (ISO26622-1) | 0.750 | 1.75 | 2.56 | 1.00 | - | 5/8''-18 |
-10 %
Brand: ToolsEngg : Plant 6
Weight: 3.36kg
TMT40TS is referred to as KM40TS™ and both are compatible.
KM™ is a trademark of Kennametal and is used only for identification purposes.
Compatible with KM40TS™ spindles, but not licensed.
Item Name
ØD
(inch)
ØD1
(inch)
L
H1
&nb..
$80.33 USD $89.26 USD
-10 %
Brand: ToolsEngg : Plant 6
Weight: 3.50kg
TMT40TS is referred to as KM40TS™ and both are compatible.
KM™ is a trademark of Kennametal and is used only for identification purposes.
Compatible with KM40TS™ spindles, but not licensed.
Item Name
ØD
(inch)
ØD1
(inch)
L
H1
&nb..
$80.33 USD $89.26 USD
-10 %
Brand: ToolsEngg : Plant 6
Weight: 3.63kg
TMT40TS is referred to as KM40TS™ and both are compatible.
KM™ is a trademark of Kennametal and is used only for identification purposes.
Compatible with KM40TS™ spindles, but not licensed.
Item Name
ØD
(inch)
ØD1
(inch)
L
H1
&nb..
$80.33 USD $89.26 USD
-10 %
Brand: ToolsEngg : Plant 6
Weight: 3.50kg
TMT40TS is referred to as KM40TS™ and both are compatible.
KM™ is a trademark of Kennametal and is used only for identification purposes.
Compatible with KM40TS™ spindles, but not licensed.
Item Name
ØD
(inch)
ØD1
(inch)
L
H1
&nb..
$80.33 USD $89.26 USD
Showing 1 to 4 of 4 (1 Pages)